Zünd

-

Mimaki CG

-

Norris Datafont

Set the serial connection to 9600 baud, 8 data bits, 2 stop bits, no parity and hardwire handshake.

-

Aristo Signline AG 130

Aristo Signline AG 75

Aristo Signline AG 50

Aristo Signline

-

Houston DMPL™ 0.025 mm.

This driver implements the Houston DMPL™ language. Documents will use a hardware step of 0.025 mm.

Houston DMPL™ 0.001 in.

This driver implements the Houston DMPL™ language. Documents will use a hardware step of 0.001 inch.

-

Sei PLT

This driver supports the Sei PLT plotter. Remember to setup the Page Size before plotting.

Sei DTS 1400

This driver supports the Sei DTS 750 plotter. Remember to setup the Page Size before plotting.

Sei DTS 750

This driver supports the Sei DTS 750 plotter. Remember to setup the Page Size before plotting.

-

Graphtec GPGL 0.01 mm.

This is driver supports all Graphtec plotters. The step size is 0.01 mm. Select ROTATE before plotting.

Graphtec GPGL 0.025 mm.

This is driver supports all Graphtec plotters. The step size is 0.025 mm. Select ROTATE before plotting.

Graphtec GPGL 0.05 mm.

This is driver supports all Graphtec plotters. The step size is 0.05 mm. Select ROTATE before plotting.

Graphtec GPGL 0.1 mm.

This is driver supports all Graphtec plotters. The step size is 0.1 mm. Select ROTATE before plotting.

-

Roland CAMM-1 1800

This driver supports roll plotting with a single page size up to 320 cm. Select <ROTATE-0> before plotting.

Roland CAMM-1 1100

This is the enlarged version of the Roland CAMM1 plotter. This driver supports roll plotting with a roll of up to 25 meters. Select <ROTATE-0> before plotting. 

Roland CAMM-1 1000A

This drivers supports roll plotting with a roll length up to 25 meters. Select <ROTATE-0> before plotting.

Roland CAMM-1 1000

This driver supports paging with a page length up to 160 cm. Select <FREE-Y> before plotting.

Roland CAMM-1

This is a standard driver which you can use with all Roland CAMM1 models. Paging is supported. Select <ROTATE-0> before plotting.

-

HPGL

This is the standard driver which you can use to control many HPGL compatible plotters. Cutter and color pen plotting with up to 8 color pens is also supported.